Kitchen island update

I haven't done much to the island with all the work going on in the breakfast room but I did get the marble cut. I bought a hand wet tile saw from Home Depot for $35. The thing worked great. We went ahead and lugged it inside to test fit it on the island.



It fits ok but I just wish it had a little more overhang all around. We salvaged this piece of marble from an old textile factory that was being gutted. It was broken on one end so we had to cut it this size.

The overhang on the front of it will serve as a small bar, we'll have 2 small stools there. We got the brackets off E-bay, they're shelf brackets from the 1800's.

As soon as the breakfast room is completed I'm going to finish the island. I still have to build the inside shelf, stain the unfinished edges and the inside shelf & floor, touch up the scratches, remove the cement from the surface of the marble, patch the holes in it with epoxy, and polish the marble. Oh, and find 2 short old stools.

Breakfast room floor

I finally tackled the breakfast room floor. It's been bugging me ever since I ripped out the old kitchen. The floor was in awful shape as you can see here:


The black stuff is the remnants of old linoleum tile glue. If that were the only problem with the floor I would have bit the bullet and scrapped the stuff off. Unfortunately the floor is also badly slanted and heavily rotted. 60 years as a kitchen were hard on this room.

In one corner of the room there was a patch that was very rotted. This corner held an old washing machine for at least the last 30 years. the drain for it must have overflowed often.


Because our driveway goes around to the back of the house this is our main entrance and the first room everyone sees when they come over. There's nothing worse than making all kinds of progress on the house and when you bring people over to show them the very first thing they see is this room... So the floor had to go.



Wonderful, as is usually my luck, many of the joists are rotted.


All 4 of these joists are bad and have to be replaced.



When I went to take them out most simply crumbled in my hands like Styrofoam.


A prime example of why I hate notch-cut joists. This is an otherwise perfect joist without any rot.



This entire house seems to be built from salvaged wood, This mortise still has the original dowel in it. There is other evidence of salvaged wood throughout the house, even in the original portion. The back sill in the original portion of the house has mortise cuts in it as well. From the look of it, it was once vertical and held the floor and ceiling sills on a 2 story house(the mortise cuts are very large on it). Most of the beams with mortise cuts in them appear to be hand hewn as well. I'm wondering if this house was built on the location of an older one, it's entirely possible as Griffin was formed in 1840 and there was an even earlier town here before that called Pleasant Grove.

Back to the floor... I removed all the bad joists...


...and installed new pressure-treated 2x10's with metal joist hangers.


We were having company over that night so I went ahead and hurriedly laid the subfloor without shimming it.


You cant tell from this picture but the floor slopes away and to the right by almost 1 1/2".

The next day I made the shims.


I laid them out on top of the subfloor for the picture to give a good idea of how much the floor slopes.

I pulled up the subfloor and screwed in the shims.


I then laid the subfloor back down.


Before I lay the flooring down I'm going to scrape/sand and prime the walls and ceiling. I'm not looking forward to that as most of the walls and all of the ceiling is beadboard. Hopefully the walls and floor will be done by this weekend... yeah right!

Installation of the fence gates

We've been working on the fence for the last 2 days. Last night for the first time the dogs were able to run in the back yard!

Yesterday we finished the front right fence.






We covered the gate opening with plywood until we can get the gate built. The neighbor has allowed us to tie our fence into his house as the property line is about 1' from his house.

The top of the wall will be landscaped and I'm going to build a set of brick steps with some of our reclaimed brick. We're going to build 2 small gates instead of one big one in this opening. On the other side of this the bush that is in the way will be transplanted and we'll be building an arbor in between the bushes on either side.

We're also going to fence in the HVAC compressors.

The fence here will only be 3 1/2' high. You can see the hole in the foreground where the post will go. I'll build some type of small gate into it for access.

Today we worked on the main gates on the left side of the house.




We still need to finish the finials, install the handles, the bar that goes into the ground, and figure out some way to lock it from either side.

We were able to get a pretty seamless fit but I'm going to have to do a little reinforcing of the posts, the gates are pretty heavy. I'm going to use lag bolts to bolt the one post to the side of the house.

We're going to finish up a few things on the gates tomorrow morning then we're going to start in on the breakfast room floor... finally!!

Antique Door Hardware

Here's some of the antique door hardware we've picked up recently from E-bay, Craigslist, and antique stores.


There's more but some of it is already installed and I couldn't fit the rest in the picture.

White Bricks?

I found this in the backyard when we were building the fence.


At first I thought it was the same as the bricks used in the study mantle but this isn't as wide as those. I first noticed the bricks in the study mantle were white a few weeks ago. Some of the paint has flaked off exposing the bare brick. I've never seen white bricks before. Does anyone know more about this? I did a little research online, one site says white bricks were popular from about 1800 to about 1870 but the site is in England so I'm not sure how relevant that is to Georgia.

Speaking of bricks, these are in our backyard. (sorry for the bad angle, this is the only shot I have of it)


They weren't visible for the first few months we lived here because the grass covered them but with all the driving over them it's exposed them. At first I thought it was a foundation for something like an outhouse or smokehouse. It doesn't really look like a foundation though, it's just 2 uneven rows of bricks, not a square. I think it's also only 1 or 2 layers deep.

What it's starting to look like to us is graves. I've heard of graves marked with bricks before.
The one on the left is about 8' long, the one on the right is almost 7'. There's also another one thats much smaller in another part of the yard, it's about 5'. Has anyone seen anything like this before?

If it does turn out to be graves I'm not really sure what to do about it. It's right in the middle of our driveway. I don't exactly feel like driving over someones grave everyday. Moving them to another part of the yard is an option. I've been thinking of looking up companies that have ground penetrating radar but I'd hate to spend the money on something like that until I'm fairly sure they are graves.

More fence pics

Well we didnt get the fence finished today but we came close. We finished putting up the dog ears on the one section and we started the small section on the right side of the house.




Here is the small section on the right side of the house.

<-----Street Backyard------->

The fence is on top of a 4' old brick retaining wall. we've set the fence back a few feet from the wall to allow room for plants. There is going to be a 4' gate in this section of fence, you can see the opening for it right after the first fence section. To allow access to the gate we'll be removing one of the bushes, building a trellis between the bushes, and building a set of brick stairs at the wall.

Backyard fence update

We worked on the fence again yesterday in between the rain drops.





This section going down the left side of the house(from the front) is about 175' long. We're rushing to finish this section and the section that comes off the right side of the house. Once those are done we'll be able to let the dogs out instead of having to walk them all the time. We're hoping to get them done today.

The rest of the perimeter has chain-link and chicken-wire fences from the neighbors. I'll eventually be putting our fence up along those fences but that will have to wait. I really need to get back upstairs and finish the bedrooms so the floor guys can refinish the second floor.

Here's a nice panorama shot of about 3/4 of our backyard.

The kitchen island

I had wanted to wait until I finished the island before posting pictures but I'm sure everyone knows how that goes...

Last week I began building the kitchen island. We had gotten some really cool old beadboard from an old textile mill in Atlanta that was being gutted. It appears they were being used as tables. We got 3 sections each about 12' long. I'm going to use the leftovers for my study.

Here's a few shots of how it looks right now:




I had to cut one of the large sections down, I mitered all the corners except for the back side. The back side is actually 2 large doors that are almost completely hidden when closed. I still need to add the spring loaded magnets to hold the doors closed. I'm using the spring loaded ones since I wont be putting any handles on the doors, you just push the door to open it.


I made the floor of the island out of my 5 1/2" T&G southern yellow pine flooring. It will be stained to match. I still have to build a shelf also. I have a large marble slab that came from the same textile mill the beadboard came from. I need to take it to get cut to size and polished. I made the island so that the marble would overhang 1/2" on all sides except for the side facing out (opposite side of the doors). It will hang over 7" on that side and will serve as a small bar. I have 2 ornate victorian wrought iron brackets that I will mount under the marble for support.

The other thing I worked on was rebuilding the fence out back.



I'm having to step it down every so often because the ground slopes down towards the back of the property. I like the stepped look in fences though. I'm hoping to get back to work on it in the next day or so.

Lots of updated pictures

Well, another two weeks have gone by since my last post. I really, really need to try to keep this updated a bit more than this. We've been going non-stop since my last post and have accomplished a lot since then. I finished roughing in the upstairs hall at the top of the stairs.




I still have a few small pieces of drywall to hang then I'm going to skim-coat the entire thing with mud mixed with sand. I'm hoping to finish this up some time next week.

We were trying to finish as many bedrooms as possible because we had guests staying over for the holidays. The only one we managed to finish was the master bedroom. We had to scrape, sand, patch the walls, and sand again.


We then primed the walls and ceiling.


Then painted the walls.


We were a bit nervous about the paint color at first, turns out that it just needed a second coat to smooth it out. I didn't realize that the dark colors we've chosen required a dark primer so the white primer was changing the color a bit. Once we put the second coat on it looked like we wanted it to.




I say we finished the room but we really haven't. There's still a lot left to do. We need to paint the trim the closet and the mantle, redo the electrical, and the floors still need to be refinished. Once the entire second floor is finished we'll be getting the floor guys in here to refinish them.

I finally took out the built-in cabinet that was in the Study. As I suspected it is not original to the house. It's built out of T&G white oak, the lumber yard's name is stamped on the back of each piece. From researching it online it appears the lumber yard dates to the '30's. This reinforces my belief that the house underwent a major renovation in the '30's where a lot of the original detailing of the house was removed.



I still haven't figured out what to do with the space. I was thinking of building some type of secret compartment or possibly making it into an alcove similar to what's on the other side of the wall in the Living Room. The new wall dividing the Study from the Foyer will be right where the return register is in the picture above, this will cut down on the space available to work with.

Next on my list was the dining room ceiling. It was sagging about 3" and in serious danger of falling. We're going to put a tin ceiling up in the next few weeks. We were using the Dining Room as our bedroom so we had to move it into the Study.



Pulling the old ceiling down was a hard, dirty, nasty job. There was 5/8" drywall put up over the original plaster. Our construction dumpster is on the opposite end of the house so I had to remove the debris one dustpan full at a time, carrying it through the center hall and living room to throw it out the window into the dumpster which is actually about 12' away from the window.




Once the ceiling was down and the mess cleaned up (2 days later) we began painting. We're using only Historic Trust approved colors from American Traditions throughout the house. Here's the finished product, we're really happy with how it turned out:





Of course we still have a long way to go in here as well. We have to stencil above the picture rail, hang the tin ceiling, strip all the trim and shellac it(including the mantle and doors), and refinish the floors.

Next we painted the Parlor.





That last shot gives a great view from the Parlor to the Dining Room and back to the Kitchen. In here we still have to wallpaper above the picture rail, strip and shellac all the trim, and refinish the floors.